Web-Shop  |
Products Snap-action switches
Picture view Table view

Find the right snap-action switches for your Application in our Marquardt web-shop. Get detailed information about snap-action switches quickly and easily.

Snap-action switches

- Please select your series

Series 1005
1005
  • Miniature snap-action switches
  • to 21 (8) A 250 V AC
  • Friction contact system the shearing movement of which can loosen weldings
  • Very high inrush currents (capacitive)
  • Contact distances less and greater than 3 mm
  • Operating forces from 0.2 to 4.2 N
To series 1005
Series 1010
1010
  • Open snap-action switches
  • to 10 (3) A 250 V DC
  • Powerful snap-action switch with C-spring contact system according to design DIN 41635C
  • High switching reliability due to large contact forces directly after switching
  • Small size, large travel and difference travel
  • Short bounce time
  • Contact system insensitive to vibrations
To series 1010
Series 1019
1019
  • Single-pole snap-action switches
  • to 6 (2) A 250 V AC
  • Snap-action switches with and without housing
  • Contact distance > 3 mm
  • Normally open contact and normally closed contact version
To series 1019
Series 1040
1040
  • Rotary shaft snap-action switches
  • to 4 (1) A 250 V AC
  • Extremely low switching torques
  • Spring steel auxiliary actuators which are easily adaptable to customer-specific installation conditions
To series 1040
Series 1045
1045
  • Subminiatur Snap-Action Switch IP 67
  • to 10(3) A 250 V AC 1E4
  • Dust and water protected switching system according IP 67
  • Rating from low DC signal currents to ratings of 10(3)A 250 VAC
  • Versions for high motor rating up to 6(6) A 250 VAC
  • Versions with integrated mechanism for breaking contact weldings
  • IEC 60335 Chapter 30 approved for household appliances
  • More than 10 million switching cycles
To series 1045
Series 1050
1050
  • Subminiature snap-action switches
  • to 10 (1.5) A 250 V AC
  • Small, efficient snap-action switches up to 10 (1.5) A 250 V AC or 10.1 A 125 - 250 V AC 1/4 HP
  • Lateral approach from both directions possible due to mushroom-shaped actuator
  • Large selection of auxiliary actuators of chrome-nickel steel and plastic
To series 1050
Series 1055
1055
  • Subsubminiature snap-action switches IP 67
  • to 4 A 12 V or 2 A 24 V DC
  • Compact design with dust and water protected switching system acc. to IP 67 (basic types 1055 / 1058)
  • Large overtravel of ≥ 1.2 mm for small size
  • The specially designed pushbutton guide enables a start-up angle of 40°
  • The modular principle offers a wide selection of connections, auxiliary actuators and fastening types
To series 1055
Series 1080
1080
  • Miniature snap-action switch
  • to 21 (8) A 250 V AC
  • The precise mounting of the moving contact part (milled bearing blade) offers optimum snap-action even with slow actuation
  • Wide range of ratings from 3 (1) A 250 V AC to 21 (8) A 250 V AC
  • Versions with gold plated contacts for signal current applications
  • Various auxiliary actuators, two suspension points
To series 1080
Series 1115
1115
  • One pole snap-action switches
  • to 16 (4) A 400 V AC 2E4
  • Double lifting contact system
  • Contact distance > 3 mm
  • Actuator can be approached from all directionsNormally open-, Normally closed- and changeover version
To series 1115
Series 1117
1117
  • Snap-action switches
  • to 16 (6) A 400 V AC
  • Double interrupting jump contact switching system
  • Contact distance > 3 mm
  • Material conformant with the filament wire test acc. to IEC 60 335-1:2001 chap. 30 and UL 94 V-0
  • Large overtravel
  • Actuator can be approached from all directions
  • Normally open contact and normally closed contact versions
To series 1117